Door Repair London Tips From The Best In The Industry

· 5 min read
Door Repair London Tips From The Best In The Industry

Patio Door Repair - How to Keep Your Door in Good Shape

Patio doors are a great addition to any house, as they bridge the gap between indoors and outdoors. However, they are susceptible to wear and tear and must to be maintained properly.

Doors that are damaged are not just an issue for security, but also contribute to the cost of energy by allowing cold air into the home.

door specialists london  that is damaged

Patio doors are an excellent way to create an effortless transition between outdoor and indoor living spaces. They can enhance the appearance of your home and boost energy efficiency. Over time the sliding mechanisms can develop problems that can affect their performance and efficiency.

One of the most common issues homeowners encounter with their patio doors is cracked or broken glass. This can be due to a variety of reasons. This could be caused by unbalanced tracks or cold drafts entering the building. It could also be because the door was incorrectly installed. If you aren't sure of the cause it is recommended to contact a professional.

Broken windows can be a safety hazard, but they can also allow colder air to get into the property, or water to enter the structure, making it more attractive to criminals. It is also essential to repair a damaged window as quickly as possible, to avoid further damage.

If your patio door is shattered and you need to get in contact with an expert glazier who can repair the glazing. This is usually a more efficient option than replacing the entire door, as it's cheaper to replace just the glass panel.

Sliding patio door glass panels are usually secured into the frame with glazing beads that can be loose with time. These beads can also break or crack when they are exposed to extreme levels of heat. Depending on the severity of the damage, you might be able to complete the task yourself, but it's advisable to seek out professional assistance to ensure a perfect finish and a secure installation.

Sliding Tracks

Over time, dust and dirt even rust can build up on the tracks of your patio doors. This can cause your door to move slower and therefore it is essential to keep these tracks clean. This can be done by using brushes and mild detergent. You can also use a degreaser to get rid of more pronounced build-ups. If your door is not moving smoothly, the track might be bent or damaged.

This is often caused by heavy doors, or pets dragging dirt into the door. The cogs or spindles may break. This could cause the handle to become stuck and difficult to lift.

Another common cause of the sliding patio door's malfunctioning is a lack of lubrication. The best way to prevent future problems is accomplished by applying a silicone-based grease the rollers and tracks. Make sure you thoroughly clean the track prior to applying lubricant. This will prevent it from accumulating dirt.

Once the lubricant is applied Test the door by moving it back and forth. Reapply lubricant if it is not moving easily. You'll soon be able to get your sliding patio doors to move again without the need for a repair.



If your door's tracks are bent, you could require removing the door in order to straighten them. This is a huge task, so it's recommended to have someone help you. Start by laying a drop cloth on the floor and dislodging the plugs that protect the screws that adjust the roller. These are usually located in the corner of both sides of the frame. After the screws have been removed the track will begin to pull away from the wall. If you spot a section of the track that bends outward, take a rubber mallet and a piece of wood. Put the wood in the area of the track which is bent outward, then strike it with the mallet until the track is straight. Repeat this process on the opposite side of the track if necessary. Once the tracks are straight, you'll be in a position to install your door again and attach any hardware that was removed.

Broken Rollers

If you find that your patio door is difficult to open and is scraping or catching on the track, then it's probably time to replace the bottom roller. Like all moving parts it's likely to wear out in the end and if you put off too long, you'll notice that the door is really difficult to use. This can cause excessive stress to other components like handles that could break or the track, which will be damaged.

It's a daunting task to replace the rollers, and you'll need to remove the entire panel from the frame. The first step is to retract the roller wheels. Then, give the panel a gentle tug to see if the panel will fall off. If the panel falls off, ask a friend to help you remove the panel and placing it on a flat area. Once the panel has been removed, you can begin to inspect it for any signs of damage.

After you have done this, you're now able to begin working on the rollers. They'll likely be glued to the metal frame so you'll need a screwdriver, and possibly a pry bar or a rigid putty knife to take them off the rollers. Once you've removed your old ones, make a note of their style and dimensions so that when you replace them, you can be sure they're a perfect match.

It's possible that there's no visible damage to the rollers and they just require lubrication. If this is the situation, spray some silicone-based lubricant over the rollers and try sliding the panel once more.

In more serious cases the bogies beneath the rollers may fail or the tracks on which they roll may be damaged. In this case the entire track will need replacing. It's usually a two-person job as the panel needs to be removed from the aluminium frame so that the builders can remove it. This is typically the longest phase of the repair and it is important to take care to avoid any cracks or shattered glass.

Weather Treatment

Paul and his wife were sick of their old patio door letting drafts through when they were in the living area watching TV or sitting in their favorite recliner. They also noticed icicles inside the frame this past winter. The couple consulted with our product expert who advised them that their doors needed of weather treatment. The door was old and had a bit of corrosion due to the ages and British weather. However it could be fixed to improve the aesthetics. They decided to go ahead with the installation of a new patio door and window treatments that would go with their home's decor.